Stainless Steel BSP Fittings

~~USD52~~ USD50

316 and 304 Stainless Steel BSP Threaded Fittings Class 3000 & 6000

SKU: SH165 Category: Stainless Steel Pipe Fittings

General Details
Chemical Properties
Dimension Tolerance
Related Products

General Details

Stainless Steel BSP Fittings are used to interconnect and seal pipes & fittings by mating an external (male) thread with an internal (female) thread. There are two types that BSPP & BSPT threads.

Same as the other threaded pipe fittings, the size is generally below 4 inch and pressure ratings are available in Class 2000lb, 3000lb and 6000lb.

5 Characteristics for Stainless Steel BSP Fittings

Corrosion Resistance

The most well-known advantage of stainless pipes fittings & flanges is their ability to hold up against corrosion, endure extreme temperatures. It is best choices to use them in corrosive environments.

Appearance

Exposed stainless steel threaded fittings are an excellent choice for commercial establishments as the material has a naturally shiny and elegant look.

Easy Installation

No need to do beveling preparation. Just screw the pipes into fittings sine they are light. But make sure the threads are same, otherwise, that may leak up the gas.

Low Cost

When you use stainless steel pipe fittings, it will last your business for many years. It is cheap because the size is small which below 4 inch. And low-maintenance due to its corrosion-resistant properties. You may no need to replace them for decades.

High Strength

Compared with mild steel, stainless steel have higher tensile strength. The duplex stainless steel have higher tensile strength than austenitic steel.

There are some many benefits for stainless steel BSP fittings, so please come to buy from us!

BSP Threaded Fittings Types

45 Degree Elbow

90 Degree Threaded Elbow

BSPP Threaded Cap

BSPT Threaded Coupling

Stainless Steel Pipe Tee

BSP Threaded Bushing

BSPT Threaded Plug

BSP Threaded Nipple

BSPP vs BSPT

BSPP thread is also British standard. It is a parallel thread fitting that uses a bonded seal ring to do the sealing. For historical reasons, BSPP has other different names at the same time. Such as BSPF ( British standard pipe fitting), BSPM(British Standard Pipe Mechanical) and PS (British Standard Pipe Straight) and so on.

BSPT thread is similar to NPT except for one important difference. The angle across the flanks of threads is 55 degrees instead of 60 degree as it is for NPT thread. Thus an NPT male thread could fit into BSPT female thread, but couldn’t sealing. That may make it dangerous while using.

Chemical Properties

Grade	C	Mn	P	S	Si	Ni	Cr	Mo
ASTM A182 F304	0.08	2	0.045	0.03	1	8.0-11.0	18.0-20.0
ASTM A182 F304H	0.04-0.10	2	0.045	0.03	1	8.0-11.0	18.0-20.0
ASTM A182 F304L	0.03	2	0.045	0.03	1	8.0-13.0	18.0-20.0
ASTM A182 F309H	0.04-0.10	2	0.045	0.03	1	12.0-15.0	22.0-24.0
ASTM A182 F310	0.25	2	0.045	0.03	1	19.0-22.0	24.0-26.0
ASTM A182 F310H	0.04-0.10	2	0.045	0.03	1	19.0-22.0	24.0-26.0
ASTM A182 F316	0.08	2	0.045	0.03	1	10.0-14.0	16.0-18.0	2.0-3.0
ASTM A182 F316H	0.04-0.10	2	0.045	0.03	1	10.0-14.0	16.0-18.0	2.0-3.0
ASTM A182 F316L	0.03	2	0.045	0.03	1	10.0-15.0	16.0-18.0	2.0-3.0
ASTM A182 F317	0.08	2	0.045	0.03	1	11.0-15.0	18.0-20.0	3.0-4.0
ASTM A182 F317L	0.03	2	0.045	0.03	1	11.0-15.0	18.0-20.0	3.0-4.0
ASTM A182 F321	0.08	2	0.045	0.03	1	9.0-12.0	17.0-19.0
ASTM A182 F321H	0.04-0.10	2	0.045	0.03	1	9.0-12.0	17.0-19.0
ASTM A182 F347	0.08	2	0.045	0.03	1	9.0-13.0	17.0-20.0
ASTM A182 F347H	0.04-0.10	2	0.045	0.03	1	9.0-13.0	17.0-20.0
ASTM A182 F348	0.08	2	0.045	0.03	1	9.0-13.0	17.0-20.0
ASTM A182 F348H	0.04-0.10	2	0.045	0.03	1	9.0-13.0	17.0-20.0